Dymo Rhino 18051 Heat Shrink Tube Tape 6mm Black on White
Dymo Rhino 18052 Heat Shrink Tube Tape 6mm Black on Yellow
Dymo Rhino 18053 Heat Shrink Tube Tape 9mm Black on White
Dymo Rhino 18054 Heat Shrink Tube Tape 9mm Black on Yellow
Dymo Rhino 18055 Heat Shrink Tube Tape 12mm Black on White
Dymo Rhino 18056 Heat Shrink Tube Tape 12mm Black on Yellow
Dymo Rhino 18057 Heat Shrink Tube Tape 19mm Black on White
Dymo Rhino 18058 Heat Shrink Tube Tape 19mm Black on Yellow
Dymo Rhino 18051 Heat Shrink Tube Tape 6mm Black on White
Dymo Rhino 18052 Heat Shrink Tube Tape 6mm Black on Yellow
Dymo Rhino 18053 Heat Shrink Tube Tape 9mm Black on White
Dymo Rhino 18054 Heat Shrink Tube Tape 9mm Black on Yellow
Dymo Rhino 18055 Heat Shrink Tube Tape 12mm Black on White
Dymo Rhino 18056 Heat Shrink Tube Tape 12mm Black on Yellow
Dymo Rhino 18057 Heat Shrink Tube Tape 19mm Black on White
Dymo Rhino 18058 Heat Shrink Tube Tape 19mm Black on Yellow
Dymo Rhino 18051 Heat Shrink Tube Tape 6mm Black on White
Dymo Rhino 18052 Heat Shrink Tube Tape 6mm Black on Yellow
Dymo Rhino 18053 Heat Shrink Tube Tape 9mm Black on White
Dymo Rhino 18054 Heat Shrink Tube Tape 9mm Black on Yellow
Dymo Rhino 18055 Heat Shrink Tube Tape 12mm Black on White
Dymo Rhino 18056 Heat Shrink Tube Tape 12mm Black on Yellow
Dymo Rhino 18057 Heat Shrink Tube Tape 19mm Black on White
Dymo Rhino 18058 Heat Shrink Tube Tape 19mm Black on Yellow
Dymo

RHINO Heat Shrink Tube Tape

Width 6mm
Colour Black on White
$55.00
$55.00
RRP $64.99
Or 4 payments of $13.75 with
Add items to a quote for bulk pricing, approvals, or purchase orders.

SKU: SD18051

UPC: 071701180513

MPN: 18051

Printable polyolefin sleeving for permanent cable marking, chosen by the diameter of the conductor, not the label.

Rhino heat shrink tube is printed by the Rhino tool, slid over the conductor and shrunk down with a heat gun. This range covers 6mm 18051, 9mm 18053, 12mm 18055 and 19mm 18057 in black on white, and 6mm 18052, 9mm 18054, 12mm 18056 and 19mm 18058 in black on yellow. Every cartridge holds 1.5 metres. The 3:1 shrink ratio is what makes it work on site: the tube goes on loose enough to pass over a terminated end, then pulls down tight and stays.

Size it by the cable, not by how big you want the writing. The 6mm tube fits conductors 1.18mm to 2.33mm across, the 9mm fits 1.73mm to 3.73mm, the 12mm fits 2.97mm to 5.13mm and the 19mm fits 4.64mm to 8.70mm, all measured as outside diameter. Below the range the tube will not grip after shrinking, and above it the tube will not slide on at all. Measure one conductor before you order rather than guessing from the cable size printed on the sheath. Black on yellow is the usual choice for warning and safety circuits.

The tubing is rated from minus 55C to 135C, resists oil, water, solvents and UV, and is UL recognised to UL 224 as well as meeting MIL-M-81531 and SAE-DTL-23053/5, which is why it turns up in switchboards, plant rooms and defence work. The 6mm, 9mm and 12mm cartridges fit the Rhino 1000, 3000, 4200, 5000, 5200, 6000 and 6000+, and 19mm needs a Rhino 4200 or larger. No Rhino cartridge fits a LabelManager or LetraTag. See the sizes in Rhino heat shrink tube, wrap rather than sleeve with flexible nylon tape, label flat plates with permanent polyester, and find the tool in Rhino industrial.

Often ordered together

  • 3:1 shrink ratio grips conductors from 1.18mm to 8.70mm outside diameter across the range
  • Printed directly by the Rhino tool, so the marker is legible and permanent
  • Polyolefin tubing rated from minus 55C to 135C in service
  • Resists oil, water, solvents, UV and general workshop chemicals
  • UL recognised to the UL 224 tubing standard, and RoHS and REACH compliant
  • Also meets MIL-M-81531 and SAE-DTL-23053/5 for defence and aerospace work
  • 1.5m per cartridge in 6mm, 9mm, 12mm and 19mm, black on white or black on yellow
  • Marking conductors and control cables in switchboards and distribution panels
  • Identifying data, comms and fibre runs in racks and risers
  • Labelling looms and harnesses in machinery and vehicle fit outs
  • Numbering circuits during solar, HVAC and building services installs
  • Warning and safety circuit marking using the black on yellow tubing
  • Tagging cable ends so a fault can be traced without a drawing

Shipping

Free shipping on orders over $149, with flat rates elsewhere and same-day dispatch on stocked items ordered before 11am AEST. Bulk, rural or out-of-area orders may require additional freight and our team will contact you if this applies. For a specific estimate, add this product to a quote.

Delivery Times

Brisbane, Sydney, Melbourne, Adelaide: 1 to 3 business days
Perth: 1 to 5 business days
Regional and outer areas: 3 to 7 business days

Returns

Unopened and unused products can be returned within 14 days of the invoice date. All genuine DYMO products carry full manufacturer warranty.

Downloadable Files

2025_05_DYMO_AU_Catalogue_2025_FA_FB.pdf Download PDF heat-shrink-tube-technical-data-sheet.pdf Download PDF DymoOnline_Rhino_Consumables.PDF Download PDF

Specifications

Range: DYMO Rhino heat shrink tube tape

Part numbers: 18051, 18052, 18053, 18054, 18055, 18056, 18057 and 18058

Tubing widths: 6mm, 9mm, 12mm and 19mm before shrinking

Cartridge length: 1.5m, every size in the range

Quantity: 1 cartridge per variant

Shrink ratio: 3:1

Cable diameter, 6mm: 1.18mm to 2.33mm outside diameter

Cable diameter, 9mm: 1.73mm to 3.73mm outside diameter

Cable diameter, 12mm: 2.97mm to 5.13mm outside diameter

Cable diameter, 19mm: 4.64mm to 8.70mm outside diameter

Material: Polyolefin

Print colours: Black on white and black on yellow

Operating temperature: Minus 55C to 135C

Application: Requires a heat gun to shrink after printing

Certifications: UL recognised (UL 224), MIL-M-81531, SAE-DTL-23053/5, RoHS and REACH

Compatible machines: 6mm, 9mm and 12mm fit Rhino 1000, 3000, 4200, 5000, 5200, 6000 and 6000+; 19mm fits Rhino 4200 and above

Not compatible with: DYMO LabelManager and DYMO LetraTag machines

Brand: DYMO Rhino

Always Here to Help

We have sold nothing but DYMO since 2009. Talk to people who know exactly which label fits which machine.

Contact Support Read all FAQs

FAQs

Measure the outside diameter of the conductor. The 6mm tube fits 1.18mm to 2.33mm, the 9mm fits 1.73mm to 3.73mm, the 12mm fits 2.97mm to 5.13mm and the 19mm fits 4.64mm to 8.70mm. Below the range the tube will not grip, above it the tube will not slide on.
Yes. The tube is printed, slid over the conductor and then shrunk with a heat gun. It has a 3:1 shrink ratio, so it goes on loose and finishes tight.
The 6mm, 9mm and 12mm cartridges fit the Rhino 1000, 3000, 4200, 5000, 5200, 6000 and 6000+. The 19mm cartridge needs a Rhino 4200 or larger.
No. Heat shrink cartridges only fit Rhino industrial tools. LabelManager machines take D1 tape and LetraTag machines take LetraTag tape.
1.5 metres, in every size in this range. How many markers that gives you depends on the length of each printed marker.
Use heat shrink when the marker must not be removable and has to survive years of heat, oil and handling. Use flexible nylon tape when the cable is already terminated at both ends and you cannot slide a sleeve on.